Dell Poweredge Server

But in some cases it may be possible to remove this extra charge. This is an EVE-NG Server built on a Dell R620 Hardware with 32GB RAM. This System actually implements 3 different Servers (each one is a separate Virtual Machine). Cisco CML-2 Server (Cisco Modeling Labs) version 2.1.2 (latest version) – Cisco VIRL Server (Virtual Internet Routing Lab) version 1.6.67 (now replaced with CML-2) – EVE-NG Server (Emulated Virtual Environment-Next Generation) Community Edition version 2.0.3-112 Please notice that this is the Community Edition (free version), not the Pro version , which requires a License. But we also offer the Pro version! Please see below the differences between the Pro and the Free versions. The Hardware is a very quiet Dell R620 Server with 32GB RAM with a 500GB HD running VMware ESXi 6.5 This Virtual Lab is a great tool for most Cisco CCNA, CCNP and CCIE Certifications. It can be used for several Certification Tracks such as Enterprise, SP (Service Provider), Data Center, Security, etc. These are the main features of the Dell R620 used to build this Virtual Lab: – 2 x Quad Core Processors (Xeon E5-2609 or higher) – 4 x Gigabit Ethernet Interfaces – - 32GB RAM (can be upgraded to 128GB) – 500GB Hard Drive (can be upgraded to SSD Drive) – Operating System: VMware ESXi 6.5 Raw Metal Virtualization OS Having your own Lab (own Physical Server) makes a lot more sense than Renting a Physical or Virtual one! This will really add up in the long run! Please attached image with Reference Prices. Note: Please notice that the Monitor is not included. You’ll need a Monitor and a Keyboard to operate this Server. EVE-NG vs CML-2 : EVE-NG Comm. Is a Free , Open Source Software that can be used to simulate complex networks. CML & VIRL are Cisco Licensed Software that can also be used to simulate complex networks. The main advantage of EVE-NG over CML is the fact that while CML provides a Cisco-only environment , EVE-NG is NOT limited to Cisco Devices! EVE-NG provides a Multi-vendor environment! That is, it allows you to emulate complex Networks with all kinds of Network Devices! Please scroll down for more specific differences between EVE-NG and CML. Please also notice that the item price doesn’t include the License for CML-2/VIRL. We’ll bill you the proper cost. Client Software NOT needed. VIRL, CML-2 and EVE-NG are VM’s that run on the Physical Dell Server. But these are just Back-End Processes that don’t have a User Interface! In order to actually use these VM’s you’ll need a separate computer (a regular PC), that will be the Client PC. The only exception is the VIRL VM, which does need a special Client Software to be installed in the Client PC. This special Software is called VM Maestro Client Software. Typical Management tasks include. Power up/Power down VM’s, Assign VLAN’s and Network Ports to the VM’s, etc. The ESXi Server can be managed using another special Software known as the vSphere Client , which of course must also be installed in the Client PC. Upgrade Options : Server’s RAM can be upgraded to 48GB, 64GB or 128GB (up from 32GB). These are some other upgrade options available: – Hard Drive upgrade to RAID-1 or RAID-5 – (one more Drives would be needed for RAID-1 and two more for RAID-5) – HD can also be upgraded to SSD (500GB or 1TB SSD Drive to replace the standard one). We can also add other Software components to this Server, like CUCM (Cisco Unified Call Manager) version 12. X That way you can have a single multi-purpose Server for different Cisco Certifications! Please write to us for details about these Upgrade options. CML/VIRL Main Features : These are some of the most important features of the Cisco CML/VIRL Software : – Includes Official Cisco Images it is the only Tool fully Licensed and approved by Cisco! – Multiple Network Platforms (IOSv, IOSvL2, NX-OSv, IOS XRv, IOS-XEv and ASAv Firewall). CML/VIRL comes with a complete set of Legal and Fully Licensed Cisco IOS Images that are the same as those running on physical Routers & Switches. New Cisco IOS releases are provided in a regular basis. So you’ll always have the most up to date Virtual IOS Images! It supports the classic IOS Images found in common ISR Routers and Layer 2 Switches: IOSv & IOSvL2 It doesn’t support Layer 3 Switches yet, but it might do so in the near future. In addition to the classic IOS Images, VIRL supports advanced Platforms such as IOS XRv & XRv 9000 (used in Service Provider environments) It also supports the ASAv Firewall , that can be used for Security related tasks. Finally, it also supports IOS-XEv , which is the virtual version of the Cisco IOS XE Software that comes in the newest ISR Routers like the 42XX, 43XX and 44XX Series! Like GNS3, EVE-NG is Free because it doesn’t include the actual IOS Images needed to boot the Virtual Devices in your Network. Without the proper IOS Images, EVE-NG alone would be basically useless! Therefore, you’d need to provide these IOS Images and upload them to EVE-NG. GNS3 & EVE-NG Users normally struggle trying to find the proper IOS Images. However, our EVE-NG Server already includes several IOS Images for a selected set of Virtual Devices. These are the Virtual Devices already implemented in our EVE-NG Server. Routers – Cisco IOSv Router version 15.9.3 – Cisco XRv Router version 6.3.1 – Cisco XRv-9K Router version 7.2.1 – Cisco CSR1000v SD-WAN Router with IOS XE version Amsterdam 17.3.2 Other Devices – Cisco ASAv Firewall version 9.14.1 – Cisco NX-OSv9K Nexus Switch version 9.2.4 – Cisco Layer-2 Switch with IOSv-L2 version 15.2. You can create multiple instances of these Virtual Devices, which are fully setup and ready to use! You can also implement many other Virtual Devices, provided that you upload the proper IOS Image for them. Bonus Software and Training Materials : This item includes a Disk (DVD) with the following Software and Training Materials : – VMware vSphere 6.0 Client Software – VMware ESXi 6.5 Operating System Installation Files (ISO CD Image) – mRemoteNG Connections Manager (provides Telnet/SSH access to the virtual devices) – VM Maestro Client Software (Maestro must be installed in a separate computer) – VIRL Training Videos (Videos about the installation, configuration and use of VIRL) – EVE-NG Training Videos (Links to YouTube Videos with useful EVE-NG Tips and Tricks). This Virtual Lab has been fully tested and. Therefore it’s guaranteed to work! I f you have any questions about the operation of this Virtual Lab, you can always count on us We’ve been providing Cisco Training Kits for years with hundreds of very satisfied customers! Please notice that due to the complex nature of this item we need. 2-3 days for processing. (it depends on where you live). Thank you for looking! The item “EVE-NG Server + Cisco CML-2 Network Lab Dell R620 32GB with VMware ESXi CCNA CCNP” is in sale since Sunday, December 16, 2018. This item is in the category “Computers/Tablets & Networking\Enterprise Networking, Servers\Servers, Clients & Terminals\Computer Servers”. The seller is “training.kits” and is located in Gainesville, Florida. This item can be shipped to United States, all countries in Europe, all countries in continental Asia, Mexico, Canada, Australia.

• Model: R620
• RAID Levels: 0
• Type: Server
• MPN: Does Not Apply
• RAM Size: 32GB
• Brand: Dell
• Number of Processors: 2
• Product Line: PowerEdge
• Maximum RAM Capacity: 768GB
• Processor Manufacturer: Intel

But in some cases it may be possible to remove this extra charge. This is a Dell R610 Server that implements a Virtual Lab combining the following Products: – GNS3 VM Server (Graphical Network Simulator 3) version 2.2.5 (latest version as of March/2020) – Cisco VIRL Server (Virtual Internet Routing Lab) version 1.6.65 (latest version as of March/2020) Both Products run on an VMware ESXi Server version 6.0 It is built using an Ultra Quiet Dell R610 Server with 48GB RAM and a 500GB HD This Virtual Lab is a great tool for most Cisco CCNA, CCNP and CCIE Certifications. It can be used for several Certification Tracks such as R&S, SP (Service Provider), Data Center, Security, etc. These are the main features of the Dell R610 used to build this Virtual Lab: – 2 x Quad Core Processors (8 Cores Total) – 4 x Gigabit Ethernet Interfaces – - 48GB RAM – 500GB Hard Drive – Operating System: VMware ESXi 6.0 Raw Metal Virtualization OS This Virtual Lab includes the following VM’s (Virtual Machines). GNS3 VM Server (Graphical Network Simulator 3) version 2.2.3 – Cisco VIRL Server (Virtual Internet Routing Lab) version 1.6.65 – Windows 2012 Server ; 180-day Trail version. Note: Please notice that the Monitor is not included. You’ll need a Monitor and a Keyboard to operate this Server. GNS3 is a Free , Open Source Software that can be used to simulate complex networks. VIRL is a Cisco Licensed Software that can also be used to simulate complex networks. This Server includes both Software Products, although it does not include a VIRL License! If needed, we can assist you with the VIRL License installation process. Both Products need a separate PC to run a Client Software that interacts with the respective Server: – GNS3 GUI Software – VM Maestro Client Software Both are Windows-based tools used to create the actual Network Topology that you are seeking to simulate. This same Client PC is also used to install the vSphere Client to manage the ESXi Server. Important Note about VIRL License : – Price of this item does NOT include the VIRL License! If needed, License must be bought by the Customer. Upgrade Options : These are the upgrade options available: – Hard Drive upgrade to 1TB : 2 x 500GB Hard Drives with RAID-0 or RAID-1 configuration. Hard Drive can also be upgraded to SSD Drive , either 500GB or 1TB SSD. We can also add other Software components to this Server, like CUCM (Cisco Unified Call Manager) version 12.0 That way you can have a single multi-purpose Server for different Cisco Certifications! Please write to us for details about these Upgrade options. Cisco VIRL is a network design and simulation environment that includes a Graphical User Interface (GUI) implemented with the VM Maestro Client Software. Cisco VIRL supports up to 20 Network Nodes. Therefore, you can build very complex Lab environments with this Virtual Lab. VIRL Main Features : These are some of the most important VIRL features: – Includes Official Cisco Images VIRL is the only Tool fully Licensed and approved by Cisco! – Automatic Configuration (done with the AutoNetkit Tool) – Multiple Network Platforms (IOSv, IOSvL2, NX-OSv, IOS XRv, IOS-XEv and ASAv Firewall). VIRL comes with a complete set of Legal and Fully Licensed Cisco IOS Images that are the same as those running on physical Routers & Switches. New Cisco IOS releases are provided in a regular basis. So you’ll always have the most up to date Virtual IOS Images! VIRL supports the classic IOS Images found in common ISR Routers and Layer 2 Switches: IOSv & IOSvL2 VIRL does not support Layer 3 Switches yet, but it might do so in the near future. In addition to the classic IOS Images, VIRL supports advanced Platforms such as IOS XRv & XRv 9000 (used in Service Provider environments) It also supports the ASAv Firewall , that can be used for Security related tasks. Finally, VIRL also supports IOS-XEv , which is the virtual version of the Cisco IOS XE Software that comes in the newest ISR Routers like the 42XX, 43XX and 44XX Series! GNS3 VM Features : These are some of the most important GNS3 VM features : – It supports Standard IOS (Legacy IOS) and VIRL IOS Images (GNS3 2.0 and higher) – Cisco Images are not embedded like in VIRL, so they must be obtained separately. By using VIRL Images, GNS3 provides support for IOS 15. X (IOSv, IOSvL2 & IOS XEv) – All work is done on the GNS3 Client PC! The GNS3 VM only provides back-end services. One of the traditional limitations of GNS3 is the fact that it doesn’t include ANY Cisco Images. So although you can download & install GNS3 for Free, normally you won’t be able to do anything with it. GNS3 users normally struggle trying to find IOS Images that can be imported into it. As mentioned above, GNS3 now can also import VIRL Images, which provides support for IOS 15. Bonus Software and Training Materials : This item includes a Disk (DVD) with the following Software and Training Materials : – VMware vSphere 6.0 Client Software – VMware ESXi 6.0 Operating System Installation Files (ISO CD Image) – mRemoteNG Connections Manager (provides Telnet/SSH access to the virtual devices) – VM Maestro Client Software (Maestro must be installed in a separate computer) – VIRL Training Videos Materials (Videos about the installation, configuration and use of VIRL) – GNS3 GUI and Server Software (GUI must also be installed in a separate computer) – GNS3 Training Videos Materials (Videos about the installation, configuration and use of GNS3). This Virtual Lab has been fully tested and. Therefore it’s guaranteed to work! I f you have any questions about the operation of this Virtual Lab, you can always count on us We’ve been providing Cisco Training Kits for years with hundreds of very satisfied customers! Please notice that due to the complex nature of this item we need. 2-3 days for processing. (it depends on where you live). Thank you for looking! The item “Cisco VIRL & GNS3 Server Dell R610 48GB VMware ESXi 6 CCNA CCNP CCIE Virtual Lab” is in sale since Monday, June 18, 2018. This item is in the category “Computers/Tablets & Networking\Enterprise Networking, Servers\Servers, Clients & Terminals\Computer Servers”. The seller is “training.kits” and is located in Gainesville, Florida. This item can be shipped to United States, all countries in Europe, all countries in continental Asia, Canada, Mexico, Australia.

• Model: R610
• RAID Levels: 0
• MPN: Does Not Apply
• Brand: Dell
• Number of Processors: 2
• Memory (RAM) Capacity: 48GB

This is a Dell R610 Server that implements a Virtual Lab combining the following Products: – GNS3 VM Server (Graphical Network Simulator 3) version 2.2.3 (latest version as of Nov/16/2019) – Cisco VIRL Server (Virtual Internet Routing Lab) version 1.6.65 (latest version as of Nov/16/2019) GNS3 is a Free, Open Source Software that can be used to simulate complex networks. VIRL is a Cisco Licensed Software that can also be used to simulate complex networks. This Server includes a 1-Year VIRL License! But again, the price of this item includes a 1-Year VIRL License! Both Products (VIRL and GNS3) run on an VMware ESXi Server version 6.0 This Virtual Lab is a great tool for most Cisco CCNA, CCNP and CCIE Certifications. It can be used for several Certification Tracks such as R&S, SP (Service Provider), Data Center, Security, etc. It is built using an Ultra Quiet Dell R610 Server with 48GB RAM and a 500GB HD. These are the main features of the Dell R610 used to build this Virtual Lab: – 2 x Quad Core Processors (8 Cores Total) – 4 x Gigabit Ethernet Interfaces (built-in Ports) – - 48GB RAM – 500GB Hard Drive – Operating System: VMware ESXi 6.0 Raw Metal Virtualization OS This Virtual Lab includes the following VM’s (Virtual Machines). GNS3 VM Server (Graphical Network Simulator 3) version 2.2.3 – Cisco VIRL Server (Virtual Internet Routing Lab) version 1.6.65 – Windows 2012 Server ; 180-day Trail version. Note: Please notice that the Monitor is not included. You’ll need a Monitor and a Keyboard to operate this Server. GNS3 is totally Free, you can use this Virtual Lab right away (Client PC required) VIRL includes a 1-Year License, which needs to be re-validated at least every 7 days. We’ll provide support for the re-validation process. Both Products and the ESXi Server itself need a separate PC to run the proper Client Software: – GNS3 GUI Software (GNS3 Client) – VM Maestro Client Software (VIRL Client) – vSphere Client Software (ESXi Client). All 3 products are Windows-based, so you’ll need a Windows PC to install them. The connection from Client to Server is a simple IP connection, which requires a LAN Switch (could be your Home Router). Important Note about VIRL License : – Price of this item does include the VIRL License! Upgrade Options : These are the upgrade options available: – Hard Drive upgrade to 1TB : 2 x 500GB Hard Drives with RAID-0 or RAID-1 configuration. Hard Drive can also be upgraded to SSD Drive , either 500GB or 1TB SSD. We can also add other Software components to this Server, like CUCM (Cisco Unified Call Manager) version 12.0 That way you can have a single multi-purpose Server for different Cisco Certifications! Please write to us for details about these Upgrade options. VIRL Main Features : Cisco VIRL is a network design and simulation environment that includes a Graphical User Interface (GUI) implemented with the VM Maestro Client Software. Cisco VIRL supports up to 20 Network Nodes. Therefore, you can build very complex Lab environments with this Virtual Lab. These are some of the most important VIRL features: – Includes Official Cisco Images VIRL is the only Tool fully Licensed and approved by Cisco! – Automatic Configuration (done with the AutoNetkit Tool) – Multiple Network Platforms (IOSv, IOSvL2, NX-OSv, IOS XRv, IOS-XEv and ASAv Firewall). VIRL comes with a complete set of Legal and Fully Licensed Cisco IOS Images that are the same as those running on physical Routers & Switches. New Cisco IOS releases are provided in a regular basis. So you’ll always have the most up to date Virtual IOS Images! VIRL supports the classic IOS Images found in common ISR Routers and Layer 2 Switches: IOSv & IOSvL2 VIRL does not support Layer 3 Switches yet, but it might do so in the near future. In addition to the classic IOS Images, VIRL supports advanced Platforms such as IOS XRv & XRv 9000 (used in Service Provider environments) It also supports the ASAv Firewall , that can be used for Security related tasks. Finally, VIRL also supports IOS-XEv , which is the virtual version of the Cisco IOS XE Software that comes in the newest ISR Routers like the 42XX, 43XX and 44XX Series! GNS3 VM Features : These are some of the most important GNS3 VM features : – It supports Standard IOS (Legacy IOS) and VIRL IOS Images (GNS3 2.0 and higher) – Cisco Images are not embedded like in VIRL, so they must be obtained separately. By using VIRL Images, GNS3 provides support for IOS 15. X (IOSv, IOSvL2 & IOS XEv) – All work is done on the GNS3 Client PC! The GNS3 VM only provides back-end services. One of the traditional limitations of GNS3 is the fact that it doesn’t include ANY Cisco Images. So although you can download & install GNS3 for Free, normally you won’t be able to do anything with it. GNS3 users normally struggle trying to find IOS Images that can be imported into it. As mentioned above, GNS3 now can also import VIRL Images, which provides support for IOS 15. Bonus Software and Training Materials : This item includes a Disk (DVD) with the following Software and Training Materials : – VMware vSphere 6.0 Client Software – VMware ESXi 6.0 Operating System Installation Files (ISO CD Image) – mRemoteNG Connections Manager (provides Telnet/SSH access to the virtual devices) – VM Maestro Client Software (Maestro must be installed in a separate computer) – VIRL Training Videos Materials (Videos about the installation, configuration and use of VIRL) – GNS3 GUI and Server Software (GUI must also be installed in a separate computer) – GNS3 Training Videos Materials (Videos about the installation, configuration and use of GNS3). This Virtual Lab has been fully tested and. Therefore it’s guaranteed to work! I f you have any questions about the operation of this Virtual Lab, you can always count on us We’ve been providing Cisco Training Kits for years with hundreds of very satisfied customers! Please notice that due to the complex nature of this item we need. 2-3 days for processing. (it depends on where you live). Thank you for looking! The item “Cisco VIRL Virtual Lab Server with VIRL License Dell R610 500GB 48GB RAM CCNA CCNP” is in sale since Sunday, December 16, 2018. This item is in the category “Computers/Tablets & Networking\Enterprise Networking, Servers\Servers, Clients & Terminals\Computer Servers”. The seller is “training.kits” and is located in Gainesville, Florida. This item can be shipped to United States, all countries in Europe, all countries in continental Asia, Canada, Mexico, Australia.

• Model: R610
• Number of Processors: 2
• RAID Levels: 0
• Memory (RAM) Capacity: 48GB
• MPN: Does Not Apply
• Brand: Dell

This is a Dell R610 Server that implements a Virtual Lab combining the following Products: – GNS3 VM Server (Graphical Network Simulator 3) version 2.2.3 (latest version as of Nov/16/2019) – Cisco VIRL Server (Virtual Internet Routing Lab) version 1.6.65 (latest version as of Nov/16/2019) Both Products run on an VMware ESXi Server version 6.0 It is built using an Ultra Quiet Dell R610 Server with 32GB RAM and a 500GB HD This Virtual Lab is a great tool for most Cisco CCNA, CCNP and CCIE Certifications. It can be used for several Certification Tracks such as R&S, SP (Service Provider), Data Center, Security, etc. These are the main features of the Dell R610 used to build this Virtual Lab: – 2 x Quad Core Processors (8 Cores Total) – 4 x Gigabit Ethernet Interfaces – - 32GB RAM (can be upgraded to 48GB) – 500GB Hard Drive (can be upgraded to SSD Drive) – Operating System: VMware ESXi 6.0 Raw Metal Virtualization OS This Virtual Lab includes the following VM’s (Virtual Machines). GNS3 VM Server (Graphical Network Simulator 3) version 2.2.3 – Cisco VIRL Server (Virtual Internet Routing Lab) version 1.6.65 – Windows 2012 Server ; 180-day Trail version. Note: Please notice that the Monitor is not included. You’ll need a Monitor and a Keyboard to operate this Server. GNS3 is a Free , Open Source Software that can be used to simulate complex networks. VIRL is a Cisco Licensed Software that can also be used to simulate complex networks. This Server includes both Software Products, although it does not include a VIRL License! If needed, we can assist you with the VIRL License installation process. Both Products need a separate PC to run a Client Software that interacts with the respective Server: – GNS3 GUI Software – VM Maestro Client Software Both are Windows-based tools used to create the actual Network Topology that you are seeking to simulate. This same Client PC is also used to install the vSphere Client to manage the ESXi Server. Important Note about VIRL License : – Price of this item does NOT include the VIRL License! If needed, License must be bought by the Customer. Upgrade Options : Server’s RAM can be upgraded to 48GB (up from 32GB). These are some other upgrade options available: – Hard Drive upgrade to 1TB : 2 x 500GB Hard Drives with RAID-0 or RAID-1 configuration. Hard Drive can also be upgraded to SSD Drive , either 500GB or 1TB SSD. We can also add other Software components to this Server, like CUCM (Cisco Unified Call Manager) version 12.0 That way you can have a single multi-purpose Server for different Cisco Certifications! Please write to us for details about these Upgrade options. Cisco VIRL is a network design and simulation environment that includes a Graphical User Interface (GUI) implemented with the VM Maestro Client Software. Cisco VIRL supports up to 20 Network Nodes. Therefore, you can build very complex Lab environments with this Virtual Lab. VIRL Main Features : These are some of the most important VIRL features: – Includes Official Cisco Images VIRL is the only Tool fully Licensed and approved by Cisco! – Automatic Configuration (done with the AutoNetkit Tool) – Multiple Network Platforms (IOSv, IOSvL2, NX-OSv, IOS XRv, IOS-XEv and ASAv Firewall). VIRL comes with a complete set of Legal and Fully Licensed Cisco IOS Images that are the same as those running on physical Routers & Switches. New Cisco IOS releases are provided in a regular basis. So you’ll always have the most up to date Virtual IOS Images! VIRL supports the classic IOS Images found in common ISR Routers and Layer 2 Switches: IOSv & IOSvL2 VIRL does not support Layer 3 Switches yet, but it might do so in the near future. In addition to the classic IOS Images, VIRL supports advanced Platforms such as IOS XRv & XRv 9000 (used in Service Provider environments) It also supports the ASAv Firewall , that can be used for Security related tasks. Finally, VIRL also supports IOS-XEv , which is the virtual version of the Cisco IOS XE Software that comes in the newest ISR Routers like the 42XX, 43XX and 44XX Series! GNS3 VM Features : These are some of the most important GNS3 VM features : – It supports Standard IOS (Legacy IOS) and VIRL IOS Images (GNS3 2.0 and higher) – Cisco Images are not embedded like in VIRL, so they must be obtained separately. By using VIRL Images, GNS3 provides support for IOS 15. X (IOSv, IOSvL2 & IOS XEv) – All work is done on the GNS3 Client PC! The GNS3 VM only provides back-end services. One of the traditional limitations of GNS3 is the fact that it doesn’t include ANY Cisco Images. So although you can download & install GNS3 for Free, normally you won’t be able to do anything with it. GNS3 users normally struggle trying to find IOS Images that can be imported into it. As mentioned above, GNS3 now can also import VIRL Images, which provides support for IOS 15. Bonus Software and Training Materials : This item includes a Disk (DVD) with the following Software and Training Materials : – VMware vSphere 6.0 Client Software – VMware ESXi 6.0 Operating System Installation Files (ISO CD Image) – mRemoteNG Connections Manager (provides Telnet/SSH access to the virtual devices) – VM Maestro Client Software (Maestro must be installed in a separate computer) – VIRL Training Videos Materials (Videos about the installation, configuration and use of VIRL) – GNS3 GUI and Server Software (GUI must also be installed in a separate computer) – GNS3 Training Videos Materials (Videos about the installation, configuration and use of GNS3). This Virtual Lab has been fully tested and. Therefore it’s guaranteed to work! I f you have any questions about the operation of this Virtual Lab, you can always count on us We’ve been providing Cisco Training Kits for years with hundreds of very satisfied customers! Please notice that due to the complex nature of this item we need. 2-3 days for processing. (it depends on where you live). Thank you for looking! The item “Cisco VIRL & GNS3 Server Dell R610 32GB VMware ESXi 6 CCNA CCNP CCIE Virtual Lab” is in sale since Saturday, May 17, 2014. This item is in the category “Computers/Tablets & Networking\Enterprise Networking, Servers\Servers, Clients & Terminals\Computer Servers”. The seller is “training.kits” and is located in Gainesville, Florida. This item can be shipped to United States, all countries in Europe, all countries in continental Asia, Canada, Mexico, Australia.

• Model: R610
• Number of Processors: 2
• RAID Levels: 0
• Memory (RAM) Capacity: 32GB
• MPN: Does Not Apply
• Processor Type: Xeon Quad Core
• Brand: Dell
• Processor Manufacturer: Intel