Dell PowerEdge M710HD Blade Server 2 x Intel SIX-CORE XEON X5650 2.66GHz 36GB R
Dell PowerEdge M710 HD Blade Server. 2 x Intel SIX-CORE XEON X5650 2.66GHz Processors. Integrated H200 RAID Controller and iDRAC. Please note that this is a blade server and requires a Dell M1000e Chassis (not included) to operate. Intel® Xeon® processor 5500 and 5600 series Six-core Intel® Xeon® Quad-core Intel® Xeon®. Microsoft® Windows Server® 2008 SP2, x86/x64 (x64 includes Hyper-VT). Microsoft® Windows Server® 2008 R2 SP1, x64 (includes Hyper-VT v2). Novell® SUSE® Linux® Enterprise Server v11, x86/x64, SP1. Red Hat® Enterprise Linux® Server v5.5, x86/x64. Red Hat® Enterprise Linux® AS/ES v4.8, x86/x64. Up to 288GB (18 DIMM slots): 1GB/2GB/4GB/8GB/16GB ECC DDR3 Up to 1333MHz. Citrix® XenServerT v 5.6 (embedded option available). Microsoft® Windows Server® 2008, with Hyper-VT. VMware® vSphereT Version 4.1 (including ESX v4.1/ESXiT v4.1). Hot-plug Hard Drive Options: 2.5 SATA SSD, SAS (15K, 10K). Hot-Swap options available: Up to two 2.5 SAS or SSD drives. I/O Mezzanine Card Options. Fully populated mezzanine card slots and switch modules will yield 3 redundant I/O fabrics per blade. 1Gb & 10Gb Ethernet: Dual-Port Broadcom. Gb Ethernet w/ TOE(BCM-5709S) Quad-Port Intel. Gb Ethernet Quad-Port Broadcom. Gb Ethernet(BCM-5709S) Dual-Port Intel. 10Gb Ethernet Dual-Port Broadcom. 10Gb Ethernet(BCM-57711) Brocade. BR1741M-k Dual-Port Mezzanine CNA 10Gb Enhanced Ethernet & Converged Network Adapters(CEE/DCB/FCoE): Dual-Port Intel. 10Gb Enhanced Ethernet(FCoE Ready for Future Enablement) Dual-Port Emulex. Converged Network Adapter(OCM10102-F-M) – Supports CEE/DCB 10GbE + FCoE Dual-Port Qlogic. Converged Network Adapter(QME8142) – Supports CEE/DCB 10GbE + FCoE Dual-Port Qlogic. Converged Network Adapter(QME8242-k) – Supports 10GbE + NPAR Dual-Port Broadcom. 57712-k Converged Network Daughter Card(NDC) – Supports CEE/DCB 10GbE + NPAR + FCoE + iSCSI-TLV Brocade. BR1741M-k Dual-Port Mezzanine CAN. Fibre Channel: Dual-Port QLogic. FC8 Fibre Channel Host Bus Adapter(HBA)(QME2572) Dual-Port Emulex. FC8 Fibre Channel Host Bus Adapter(HBA)(LPe1205-M) Emulex. 8 or 4 Gb/s Fibre Channel Pass-Through Module Infiniband: Dual-Port Mellanox. ConnectX-2T Dual Data Rate(DDR) and Quad Data Rate(QDR) InfiniBand. PERC H200 Integrated SAS Controller (6Gb/s). Four embedded Broadcom® 5709S Gigabit NIC with failover and load balancing. TOE (TCP/IP Offload Engine) supported on Microsoft® Windows Server® 2003 SP1 or higher with Scalable Networking Pack. ISCSI Offload supported on Windows Server® 2003 SP1 or higher, Red Hat® Enterprise Linux® 5, and SUSE® Linux® Enterprise Server 10. Scalable Networking Pack for Windows Server® 2003 is not required. Boot from SAN (iSCSI and FC) supported Optional add-in NICs: See I/O Mezzanine Card Options Optional add-in HBAs: See I/O Mezzanine Card Options. Supplied by Dell’s M1000e Blade Chassis. The PowerEdge M710HD blade server fits in the PowerEdge M1000e blade enclosure. A total 16 half-height blades can fit into every M1000e enclosure. Full-height and half-height blades can be mixed in M1000e enclosures with no limitations. M710HD Dimensions and Weight (blade only): Height: 18.9 cm (7.4 in) Width: 5 cm (2 in) Depth: 48.6 cm (19.2 in).
